List Of How To Mount A Tv Over A Fireplace Without Studs References. Firstly, locate the studs behind the wall. Our goal was to determine how far away we must sit from the tv mounted above the mantle not to need to lookup.
Final handling of the cables. Mounting a tv over the fireplace. How to hang a tv above fireplace without studs.
Mounting A Tv Over A Masonry Fireplace Usually Means Drilling Into A Stone Or Brick And Mortar Fireplace Facing For The Hardware, Mounting Brackets And The Tv.
First, you'll need to consider the height of the fireplace. However, if you are going to fix to timber framing behind you will need to actually find stud locations, with an electronic sensor. There are a few considerations that you need to make before mounting a tv above a fireplace.
If You Choose To Follow The Advice Of Others And Mount Plywood First, Add The Weight Of The Plywood And Television Together.
Firstly, locate the studs behind the wall. Next, fit the brackets behind the tv and hang them firmly on the wall mount. There will be studs on each side of the fireplace at bare minimum.
Our Favorite Tv Over Fireplace No Studs Only On Miraliva Com Wall Units With Faux Stone Fireplaces.
You’ll be able to attach the television to the kit and mount the kit directly to the wall without causing any problems. Drill holes in the back of the board that are high enough so they don’t hit any studs on the wall or other framing. To secure the tv mount to the plywood, select the appropriate screws.
Increased Space In The Room:
If the tv is too heavy, have someone assist you in carrying it. You can mount a tv without studs using anchors, toggle anchors, mounting plates, ceiling mounts, and other mounting options. If you’ve got a heavier tv and you’re still wondering how to wall mount a tv without studs, you could make a mounting plate to go over your wall linings to cover wall studs, or top and bottom plates.
Tv Wall Mount Installation With Wire Concealment Over Fireplace.
Buy a sheet of 3/4 finished plywood, cut it so it can be bolted to the studs on each side, paint it to match the wall, and attach the bracket/s to the plywood. Your going to want some kind of backing behind the drywall for sure. It can be made from either steel, aluminum, painted plywood, or mdf and they can help your mounting hardware bear a.